331-2 Highway Stormwater Runoff Monitoring and Effectiveness of Vegetated Filter Strips Under Wet Climate in Western Oregon.
Poster Number 1450
See more from this Division: SSSA Division: Soil PhysicsSee more from this Session: Sensors and Instrumentation for Mapping and Monitoring Applications: II
A monitoring network was established in Oregon from the west slope of the Coast Range to the west slope of Cascades which encompassed Willamette valley. Five monitoring sites were built on highway 18, 20, 22, 34, and Interstate highway 5 to collect surface runoff, soil moisture, and precipitation data. 10 feet X10 feet and 10 feet X 20 feet plots were used along the roadside to harvest runoff water. A novel "Groovy Bucket" design together with a digital data logger were employed to monitor runoff flow rate. Physical properties of the soils on highway embankment were also investigated. The results showed that soil texture varies from loamy sand to silty clay among different locations. After the first monitoring period from October 2013 to April 2014, the data showed that VFS worked effectively as the buffer zone to store runoff water in the soils, however, a minimum width of 10 feet can not capture peak runoff generated by intensive rainfalls. Relationship between soil saturation and runoff flow rate revealed that wet antecedent soil conditions generated more runoff compared to dry antecedent soil conditions. Infiltration tests indicated that soil infiltrability of the filter strips decreased dramatically after receiving the winter precipitation (rainfall and snowfall), which reduces the ability of the filter strips for retaining runoff for the forthcoming storm events.
See more from this Session: Sensors and Instrumentation for Mapping and Monitoring Applications: II